There are no limitations for field names in Zend_Search_Lucene.

Nevertheless it's a good idea not to use 'id' and 'score' names to avoid ambiguity in QueryHit properties names.

The Zend_Search_Lucene_Search_QueryHit id and score properties always refer to internal Lucene document id and hit score. If the indexed document has the same stored fields, you have to use the getDocument() method to access them:

Indexing performance is a compromise between used resources, indexing time and index quality.

Index quality is completely determined by number of index segments.

Each index segment is entirely independent portion of data. So indexes containing more segments need more memory and time for searching.

Index optimization is a process of merging several segments into a new one. A fully optimized index contains only one segment.

Full index optimization may be performed with the optimize() method:

Index optimization works with data streams and doesn't take a lot of memory but does require processor resources and time.

Lucene index segments are not updatable by their nature (the update operation requires the segment file to be completely rewritten). So adding new document(s) to an index always generates a new segment. This, in turn, decreases index quality.

An index auto-optimization process is performed after each segment generation and consists of merging partial segments.

There are three options to control the behavior of auto-optimization (see Index optimization section):

• MaxBufferedDocs is the number of documents that can be buffered in memory before a new segment is generated and written to the hard drive.

• MaxMergeDocs is the maximum number of documents merged by auto-optimization process into a new segment.

• MergeFactor determines how often auto-optimization is performed.

Note: All these options are Zend_Search_Lucene object properties- not index properties. They affect only current Zend_Search_Lucene object behavior and may vary for different scripts.

MaxBufferedDocs doesn't have any effect if you index only one document per script execution. On the other hand, it's very important for batch indexing. Greater values increase indexing performance, but also require more memory.

There is simply no way to calculate the best value for the MaxBufferedDocs parameter because it depends on average document size, the analyzer in use and allowed memory.

A good way to find the right value is to perform several tests with the largest document you expect to be added to the index ^[1] memory_get_usage() memory_get_peak_usage() . It's a best practice not to use more than a half of the allowed memory.

MaxMergeDocs limits the segment size (in terms of documents). It therefore also limits auto-optimization time by guaranteeing that the addDocument() method is not executed more than a certain number of times. This is very important for interactive applications.

Lowering the MaxMergeDocs parameter also may improve batch indexing performance. Index auto-optimization is an iterative process and is performed from bottom up. Small segments are merged into larger segment, which are in turn merged into even larger segments and so on. Full index optimization is achieved when only one large segment file remains.

Small segments generally decrease index quality. Many small segments may also trigger the "Too many open files" error determined by OS limitations ^[2] Zend_Search_Lucene .

in general, background index optimization should be performed for interactive indexing mode and MaxMergeDocs shouldn't be too low for batch indexing.

MergeFactor affects auto-optimization frequency. Lower values increase the quality of unoptimized indexes. Larger values increase indexing performance, but also increase the number of merged segments. This again may trigger the "Too many open files" error.

MergeFactor groups index segments by their size:

1. Not greater than MaxBufferedDocs.

2. Greater than MaxBufferedDocs, but not greater than MaxBufferedDocs*MergeFactor.

3. Greater than MaxBufferedDocs*MergeFactor, but not greater than MaxBufferedDocs*MergeFactor*MergeFactor.

4. ...

Zend_Search_Lucene checks during each addDocument() call to see if merging any segments may move the newly created segment into the next group. If yes, then merging is performed.

So an index with N groups may contain MaxBufferedDocs + (N-1)*MergeFactor segments and contains at least MaxBufferedDocs*MergeFactor^(N-1) documents.

This gives good approximation for the number of segments in the index:

NumberOfSegments <= MaxBufferedDocs + MergeFactor*log _MergeFactor (NumberOfDocuments/MaxBufferedDocs)

MaxBufferedDocs is determined by allowed memory. This allows for the appropriate merge factor to get a reasonable number of segments.

Tuning the MergeFactor parameter is more effective for batch indexing performance than MaxMergeDocs. But it's also more course-grained. So use the estimation above for tuning MergeFactor, then play with MaxMergeDocs to get best batch indexing performance.

The Zend_Search_Lucene instance performs some work at exit time if any documents were added to the index but not written to a new segment.

It also may trigger an auto-optimization process.

The index object is automatically closed when it, and all returned QueryHit objects, go out of scope.

If index object is stored in global variable than it's closed only at the end of script execution ^[3] PHP .

PHP exception processing is also shut down at this moment.

It doesn't prevent normal index shutdown process, but may prevent accurate error diagnostic if any error occurs during shutdown.

There are two ways with which you may avoid this problem.

The first is to force going out of scope:

And the second is to perform a commit operation before the end of script execution:

This possibility is also described in the "Advanced. Using index as static property" section.

It's a common practice to store some unique document id in the index. Examples include url, path, or database id.

Zend_Search_Lucene provides a termDocs() method for retrieving documents containing specified terms.

This is more efficient than using the find() method:

Zend_Search_Lucene is a relatively memory-intensive module.

It uses memory to cache some information and optimize searching and indexing performance.

The memory required differs for different modes.

The terms dictionary index is loaded during the search. It's actually each 128^{th [4]} Zend_Search_LuceneAPI term of the full dictionary.

Thus memory usage is increased if you have a high number of unique terms. This may happen if you use untokenized phrases as a field values or index a large volume of non-text information.

An unoptimized index consists of several segments. It also increases memory usage. Segments are independent, so each segment contains its own terms dictionary and terms dictionary index. If an index consists of N segments it may increase memory usage by N times in worst case. Perform index optimization to merge all segments into one to avoid such memory consumption.

Indexing uses the same memory as searching plus memory for buffering documents. The amount of memory used may be managed with MaxBufferedDocs parameter.

Index optimization (full or partial) uses stream-style data processing and doesn't require a lot of memory.

Zend_Search_Lucene works with UTF-8 strings internally. So all strings returned by Zend_Search_Lucene are UTF-8 encoded.

You shouldn't be concerned with encoding if you work with pure ASCII data, but you should be careful if this is not the case.

Wrong encoding may cause error notices at the encoding conversion time or loss of data.

Zend_Search_Lucene offers a wide range of encoding possibilities for indexed documents and parsed queries.

Encoding may be explicitly specified as an optional parameter of field creation methods:

This is the best way to avoid ambiguity in the encoding used.

If optional encoding parameter is omitted, then the current locale is used. The current locale may contain character encoding data in addition to the language specification:

The same approach is used to set query string encoding.

If encoding is not specified, then the current locale is used to determine the encoding.

Encoding may be passed as an optional parameter, if the query is parsed explicitly before search:

The default encoding may also be specified with setDefaultEncoding() method:

The empty string implies 'current locale'.

If the correct encoding is specified it can be correctly processed by analyzer. The actual behavior depends on which analyzer is used. See the Character Set documentation section for details.

It should be clear that Zend_Search_Lucene as well as any other Lucene implementation does not comprise a "database".

Indexes should not be used for data storage. They do not provide partial backup/restore functionality, journaling, logging, transactions and many other features associated with database management systems.

Nevertheless, Zend_Search_Lucene attempts to keep indexes in a consistent state at all times.

Index backup and restoration should be performed by copying the contents of the index folder.

If index corruption occurs for any reason, the corrupted index should be restored or completely rebuilt.

So it's a good idea to backup large indexes and store changelogs to perform manual restoration and roll-forward operations if necessary. This practice dramatically reduces index restoration time.